Floor Mat

Floor Mat





1

• Removal:

- Remove front seats.

- Remove rear bench seat: from November 2004 => [ Bench Seat, from November 2004 ] Rear Seats.

- Remove lower A-pillar trim on left and right. Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim.

- Remove lower B-pillar trim on left and right. Refer to => [ Lower B-Pillar Trim ] Lower B-Pillar Trim.

- Remove driver's side foot rest. Refer to => [ Footrest ] Footrest.

- Remove center console. Refer to => [ Center Console, through October 2004 ] Storage Compartments and Covers.

- Loosen wiring harness under center console.

- Remove buffer pad - 4 - beneath center console and remove bolt - 5 -.

- Remove wiring harness from vehicle.

- Remove air ducts to center console.

- Remove bolt - 3 - on front of carpet tab in footwell.

- Fold floor mat lengthwise and remove it from vehicle.

• Installing:

• Floor covering rips easily from cut-outs. Carefully install floor covering in vehicle.

- Fold new floor mat lengthwise and lay it in vehicle.

- Before installing a new floor mat - 1 -, remove transport web - 2 -.

- Install floor mat in reverse order of removal.

2 Transport Brace

3 Bolt

4 Rubber Plug

5 Bolt