Rear Panel Sill

Rear Panel Sill

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1783)









1 Rear Panel Sill

• Removal:

- Remove rear panel trim => [ Rear Panel Trim ].

- Remove four bolts - 2 -.

- Remove rear panel sill - 1 - upward.

• Installing:

- Check whether the four expanding nuts - 3 - are seated properly and replace them if necessary.

- Position rear panel sill with four holes on expanding nuts - 3 -.

- Thread in four bolts - 2 - through holes into expanding nuts - 3 -.

2 Screws (Qty. 4)

• Tightening specification 3 Nm

3 Expanding Nuts (Qty. 4)