Drivers Side Storage Compartment (with and without knee bolster)

Drivers Side Storage Compartment (With And Without Knee Bolster), Removing And Installing

Special tools, testers and auxiliary items required







- Special hook 3370







- Torque wrench V.A.G 1331







1 - Instrument panel cover
2 - Screw
- Tightening torque 9 Nm
3 - Screw Tightening torque 9 Nm
4 - Left support
- Only on vehicles with knee bolster
5 - Screws, (2x)
- Tightening torque 9 Nm
6 - Screw
- Tightening torque 9 Nm
7 - Right support
- Only on vehicles with knee bolster
8 - Screws, (2x)
- Tightening torque 9 Nm
9 - Driver-side storage compartment

- Removal:
- Remove instrument panel cover - 1 -.
- Remove bolts - 2 - and - 8 -.
- Pull storage compartment at top of instrument panel back and remove.
- Unclip diagnostic socket.
- Disconnect electrical harness connector at footwell illumination and, if necessary, disconnect additional loudspeaker.

- Installing:
- First engage drivers side storage compartment in guides at lower edge, then clip into top of instrument panel.







Removing right instrument panel cover
- Pull off right instrument panel cover - arrow - with hook for front end 3370







Auxiliary speaker, removing
- Disconnect electrical connector - 2 -.
- Unthread bolt - 1 - and remove angle bracket - 3 - and additional speaker - 4 -.