Vehicle Diagnostic, Testing and Information System VAS 5051, Connecting and Selecting Function

Vehicle diagnostic, testing and information system VAS 5051, connecting and selecting functions

Special tools, testers and auxiliary items required
^ Vehicle diagnostic, testing and information system. VAS 5051





^ Diagnostic lead VAS 5051/1 or VAS 5051/3

CAUTION:
^ Testers and measuring instruments are always to be attached to rear seat during test drive.
^ These devices may be operated only by a passenger during a test drive.





- Connect diagnostic lead connector VAS 5051/1 or VAS 5051/3 at Data Link Connector (DLC) - arrow -.





- Switch on tester - arrow -.

The tester is operational when it displays a picture of a car.

- Switch on ignition.
- Touch Guided Fault Finding button on display screen.
- Select the following:

^ Make
^ Model
^ Model year
^ Version
^ Engine code letters

- Confirm entered data.

Wait until tester has interrogated all the control modules in the vehicle.

- Press Go to button and select "Function/component selection".
- Select "Suspension" on display.
- Select "Brake system" on display.
- Select "01 - On Board Diagnostic Capable System".
- Select "Anti-lock brake system" on display.
- Select "Function" on display.

Now, all possible functions of Anti-lock Brake System (ABS) installed in vehicle are displayed.

- Select desired function on display.