Fuse Panel for Main Fuse

Fuse Panel for Main Fuse

Removing





- With ignition switched off, disconnect battery Ground (GND) wire. Refer to => [ Battery, Disconnecting and Connecting ] [1][2]Battery.

- Remove plenum chamber cover rubber seal in - direction of arrow -.

- Remove plenum chamber cover - 1 - forward.

- Fold cover - 2 - to side and remove nut - 3 - at electrical wire.





- Remove nut - 1 - for fuse panel at positive pole.

Installing

Install in reverse order of removal, observing the following:

- Connect battery. Required actions => [1][2]Battery.

Tightening Specifications