Backrest Heating Element, Removing and Installing

Backrest Heating Element, Removing And Installing







Removing
- Remove seat.
- Remove the backrest.

NOTE:
- Electrical wiring harness must not be loosened at seat pan.
- Set aside backrest toward rear on soft surface.

- Remove backrest cover and upholstery.
- Cut out area - A - with electrical connection wire from old heating element.
- Remove old electrical connection wire.
- Disconnect electrical wire connections to heating elements at backrest bolsters at positions - B -.
- Disconnect electrical connection wires to upper backrest heating element at positions - C -.

Installing
- Align new heating element on backrest surface, remove protective foil and glue new heating element to same positions as old heating elements.
- Route connecting wires to backrest bolsters through openings in seat cushion without crossing.