Erase DTC Memory (Function 05)

Erasing DTC Memory

Requirements:
- DTC memory checked, Check DTC Memory (Function 02) and all displayed faults rectified.







Indicated on display of Diagnostic Operation System VAS 5051A:
- Select function "05 - Erasing DTC memory".

Indicated on display of Diagnostic Operation System VAS 5051A:







- There is no display in zone - 1 -.
- A box appears in display zone - 2 - with a message indicating that touching OK key will erase data (of fault memories) and requiring confirmation that function must be implemented.

NOTE:
- If display zone - 1 - indicates "DTC memory not yet checked", check DTC memory and rectify any faults.
- The DTC memory is not erased if, for example, the ignition is switched off between checking and erasing the DTC memory.

- On display of Diagnostic Operation System VAS 5051A, touch "O.K." box in zone - 2 -.
As soon as the DTC memory has been erased, zone - 1 - displays the message "DTC memory erased".
- On display of Diagnostic Operation System VAS 5051A, touch box with <- key.