Telephone Baseplate

Telephone Baseplate

Telephone Baseplate, Instrument Panel





1 Mount

• Placed in center console from behind

2 Center console

• With holes for base plate

3 Mounting plate

4 Base plate

• For handset/cell phone mount

5 1 Nm

6 2 Nm

7 Black 12-pin multi-pin harness connector (T12)

• Ensure connector is seated correctly.

Black 12-pin multi-pin harness connector (T12)





1 Ser Tx (+) to Telephone Transceiver (R36)
2 Terminal 30 from Telephone Transceiver (R36)
3 Ser Rx (+) from Telephone Transceiver (R36)
4 Terminal 31 from Telephone Transceiver (R36)
5 Microphone input (+) from Telephone Transceiver (R36)
6 NF (+) to Telephone Transceiver (R36)
7 Ser Tx (-) to Telephone Transceiver (R36)
8 Terminal 30 from Telephone Transceiver (R36)
9 Ser Rx (-) from Telephone Transceiver (R36)
10 SNDREQ signal to Telephone Transceiver (R36)
11 Microphone input (+) from Telephone Transceiver (R36)
12 NF (-) to Telephone Transceiver (R36)

Telephone Baseplate, Center Armrest

- Turn off all electrical components.

- Remove ignition key.

Removing

- Remove Cellular Telephone (R54) from Telephone Baseplate (R126) and unclip it.

- Beginning at front - arrow -, carefully pry storage compartment - 1 - out of trim - 2 -.





- Remove bolts - arrows - (2 Nm) from underside of storage compartment.





- Disconnect connector - 1 - and remove bolts - arrows - (1 Nm).





- Disconnect remaining connectors and remove Telephone Baseplate (R126).

Installing

- Install in reverse order.