Rear Lid Lock and Handle Mechanism, Sedan

Rear Lid Lock and Handle Mechanism, Sedan





1 - Rear lid lock

• To remove, unclip operating rod from swivelling bush and disengage.

• Unscrew hex nuts - 3 - and remove rear lid lock.

2 - Swivelling bushing

• After installing rear lid lock, engage operating rod and secure.

3 - Nut

• 8 Nm

4 - Operating rod

5 - Bowden cable

6 - Lock cylinder

• Removing:

• Disconnect electrical harness connectors.

• Disengage Bowden cable - 6 - from lock cylinder.

• Remove combination bolt - 7 -.

• Twist lock cylinder 90°.

• Remove lock cylinder from handle mechanism.

7 - Combination bolt

• 8 Nm

8 - Engine

• Removing and installing => [ Rear Lid Remote Control Motor, Sedan ] Service and Repair

9 - Grip piece

• Removing:

• Rear lid trim removed.

• Lock cylinder removed.

• Remove hex head collar nuts - 10 -.

• Press in catches - arrows -.

• Remove grip piece.

10 - Hex head collar nut

• 8 Nm