Convertible Top: Adjustments

Side Windows, Adjusting

Special tools, testers and auxiliary items required

• Side Window Installation Tool (V.A.G 1739)

- Remove side panel trim.

- Remove front door trim.

• The adjustment steps are described on the rear windows as an example and can be done the same way on the door windows.

Angle, adjusting





- Using Side Window Installation Tool (V.A.G 1739 ), loosen lock nuts - 1 - on adjusting collar screws.

- Adjust angle of inclination by turning hex socket - 2 -.

- Tighten lock nut.

Longitudinal angle and closing height, adjusting





- Loosen bolts - arrows -.

- Slide side window into convertible top seal groove.

- Tighten screws.

Adjustment, checking





- With convertible top closed, check whether front and rear windows run into seals when raised - arrow -.