High Beam Headlamp, Replacing Bulb

HID Headlamps

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

CAUTION!
high voltage!

Make sure to disconnect battery Ground (GND) strap before performing work on parts of High intensity gas discharge (xenon) headlamps marked with yellow high voltage symbols.

High Beam Headlamp, Replacing Bulb

CAUTION!
high voltage!

Make sure to disconnect battery Ground (GND) strap before performing work on parts of High intensity gas discharge (xenon) headlamps marked with yellow high voltage symbols.

Removing

- Remove headlamp => [ HID Headlamps ].

- Remove housing cover from headlamp housing.

- Disconnect electrical harness connector at igniter for gas discharge lamp.

- Rotate light bulb counterclockwise - arrow - and remove it from headlamp housing.





- Disconnect electrical harness connector at bulb.

Installing

Installation is reverse of removal, noting the following:

- Do not touch glass portion with bare hands.

- Secure light bulb by turning clockwise.

- Secure housing cover using wire clamp.

- Install headlamp => [ HID Headlamps ].