Rear Window Assembly Overview, Sedan

Rear Window Assembly Overview, Sedan





1 - Rear window

• Removal => [ Rear Window, Sedan ] Rear Window, Sedan

• When installing, note direction of joint - arrow - in magnified area of illustration.

• After inserting window, pull up to dimension - a - = 6.5 mm at roof.

• Align window at sides.

2 - Adhesive end profile

• Adhere next to vertical rear window defrosting strips => Rear Window, Sedan

• Adhesive must not touch distributing wire for rear window defroster.

3 - Adhesive bead

• Note varying spacing dimensions to window edge.

• The dimensions - b - and - c - are achieved when you allow the application nozzle to touch each inner edge of the molding.

• The distance to lower window edge dimension - d - is 15 mm.

• Bead cross section

• Bead width = 8 ± 2 mm

• Bead height = 13.5 ± 1.5 mm

4 - Spacers

• Note different heights for standard glass and tinted glass.

• Place spacers at distance of 3 mm to lower window edge onto markings applied in ceramic screen printed area.