Windshield Wiper Blade Park Position, Adjusting

Windshield Wiper Blade Park Position, Adjusting

Procedure

- Switch on ignition.

- Actuate touch-wipe function and allow wiper motor to move to end position.

- Switch off ignition.

- Position wiper blades on windshield and align as follows:





• Dimension - a - = 24 mm.

• Dimension - b - = 44 mm.

• The figures given here are the distances between wiper blades and cowl panel grille of plenum chamber at bottom edge of windshield.

- Tighten nuts for wiper arms.

- Switch on ignition.

- Actuate touch-wipe function and allow wiper motor to move to end position.

- Switch off ignition.

- If necessary, re-align wiper arms and tighten nuts again.

Tightening Specifications