Rear Parking Aid Sensors

Parking Aid System

General Information

The optional parking aid system (also know as "Acoustic park assist" or "Parktronic(R)") is only available as a 4-channel system that monitors the area to the rear of the vehicle.

The system is activated automatically whenever the vehicle is shifted into reverse.

Before troubleshooting or servicing, technicians must be familiar with the functions and operation specifics of the parking aid system. Always read the owner's manual and review applicable system functions and operation limitations.
• Additional information:

=> Owner's Manual

=> Wiring Diagrams & Component Locations

Rear Parking Aid Sensors

• Location: In rear bumper cover - arrows -.





Removing

- Remove rear bumper cover Removal and Installation

- Disconnect applicable electrical connection - 1 - from sensor.





- Press both catches - arrows - to side and press sensor - 2 - inward from outside.

Installing

Install in reverse order of removal, noting the following:

- Install rear bumper cover Removal and Installation.