Glove Compartment, Removing And Installing (vehicles with knee bolster)

Glove Compartment, Removing And Installing (Vehicles With Knee Bolster)

Special tools, testers and auxiliary items required







- Special hook 3370







- Torque wrench V.A.G 1410







1 - Glove compartment

- Removal:
- Disconnect instrument panel cover - 3 -.
- Open glove compartment cover.
- Remove bolts - 4 -.
- Remove glove compartment downward.
- Disconnect harness connectors to electrical components in glove compartment where applicable.

- Installing:
Installation is reverse of removal.

2 - Instrument panel
3 - Instrument panel cover
- Removing
4 - Screws (9x)
- Tightening torque 5 Nm







Removing right instrument panel cover
- Pull off right instrument panel cover - arrow - with hook for front end 3370