Connectors, Disconnecting

Connectors, Disconnecting





1 - Front Seat

2 - Belt Buckle Sensor Connector (Black)

3 - Seat Heater Connector (Green)

4 - Current Supply Connector (Red)

5 - Airbag Connector (Yellow)

6 - Connector Point Cover

• Removing

- Tip front seat - 1 - back.

- Remove coupling station cover - 6 - upward.

- Press in tab on airbag connector - 5 - on tunnel side and disconnect airbag connector - 5 -.

- Press in tab on connector for voltage supply - 4 - on tunnel side and disconnect connector for voltage supply - 4 -.

- Press in tab on connector for heated seat - 3 - on tunnel side and disconnect connector for heated seat - 3 -.

- For vehicles with seatbelt fasten sensor: Press in tab on connector for seatbelt fasten sensor - 2 - on tunnel side and disconnect connector for seatbelt fasten sensor - 2 -.

- Connect airbag adapter. Refer to => [ Airbag Adapter, Connecting ] Airbag Adapter, Connecting.

- With help from a second mechanic, lift front seat - 1 - out of vehicle.