Front Seats (Standard Seat)

Storage Compartment, Disassembling And Assembling

Storage compartment, disassembling
- Remove storage compartment.

Remove trim.







- Using Trim Removal Wedge 3409 , unclip trim - 1 - from retaining tabs - arrows - (Qty. 4) on inner part - 2 -.

Handle with locking mechanism, removing
- Remove trim.







- Remove rod - 1 - from inner part - 3 -.
- Remove handle with locking mechanism - 4 -, torsion spring - 2 - and axle - 1 -.

Insert, removing

NOTE:
- The insert is placed in the inner part and is not secured by any additional means.
- For overview purposed, the trim and handle with locking mechanism are not shown in the illustration.

- Open storage compartment.







- Remove insert - 1 - from inner part - 2 -.

Inner part, removing from outer part
- Open storage compartment.







- Press retainers - 2 - (Qty. 2) upward in - direction of arrow A -.
- Tip inner part - 1 - down in - direction of arrow B -.







- Remove outer part - 1 - from guide - arrow - on inner part - 2 -.

Storage compartment, assembling
Assembly is performed in the reverse order of removal. Observe the following when doing so:







- Engage torsion spring - 1- so that shorter side - arrow A - is supported on inner part - 2 - and longer side - arrow B - is supported on handle - 3 -.