Trim Retaining Bracket, Sill Side, Assembly Overview

Recaro Front Seats, from November 2004

• From August 2005, the conventional wiring harness routing to the connector station under the front seat. Refer to => [ Connectors, Disconnecting ] Connectors, Disconnecting has been replaced with modular wiring routing. Refer to => [ Modular Wiring Routing, from August 2005, Assembly Overview ] Standard Front Seat, From November 2004.

• The modular wiring routing has not been implemented for all countries.

Trim Retaining Bracket, Sill Side, Assembly Overview

I - Front Retaining Bracket





1 Seat Pan Upper Frame

• with cover and upholstery

2 Front Retaining Bracket

• Removing and Installing, refer to => [ Front Retaining Bracket ] Recaro Front Seats, From November 2004

3 Spring Nut

• Quantity: 2

4 Bolt

• 3.5 Nm

• Quantity: 2

II - Rear Retaining Bracket





1 Seat Pan Upper Frame

• with cover and upholstery

2 Upper Retaining Bracket

• Removing and Installing, refer to => [ Upper Retaining Bracket ] Recaro Front Seats, From November 2004

3 Backrest

• with cover and upholstery

4 Rear Retaining Bracket

• Removing and Installing, refer to => [ Rear Retaining Bracket ] Recaro Front Seats, From November 2004

5 Bolt

• 3.5 Nm

• Quantity: 2