Drawer

Front Seats

• From 06.2006, the usual wiring harness routing to connector station under front seat. Refer to => [ Connectors, Disconnecting ] Front Seats has been replaced with modular wiring routing => [ Modular Wiring Routing Assembly Overview, from June 2006 ] Front Seats.

• The modular wiring routing has not been implemented for all countries.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular. Refer to => [ Modular Wiring Routing Versions ] Front Seats.

Drawer





1 - Handle

2 - Drawer

• Removing

- Remove seat.

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Pull the handle -1- and pull the drawer -2- out.

- Remove bolts - 3 - (Qty. 2).

- Remove bolts - 4 - (Qty. 2).

- Remove the drawer -2-.

• Installing

- Install the drawer -2- in reverse order of removal.

3 - Screws, (Qty. 2)

• 3.5 Nm

4 - Screws, (Qty. 2)

• 3.5 Nm