Seat Height Adjustment Motor

Seat Height Adjustment Motor

Special tools, testers and auxiliary items required

• Engine and transmission holder (VAS 6095)





• Fixture for seat repair (VAS 6136)





• If the motor is faulty, replace the upper seat pan frame.





1 Four-Way Lumber Support Motors (Qty. 2)

2 Seat Height Adjustment Motor

• Removing

- Remove seat. Refer to => [ Power Front Memory Seat ] Power Front Memory Seat.

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Remove side trim on sill side. Refer to => [ Side Trim, Sill Side ] Side Trim, Sill Side.

- Remove side trim on tunnel side. Refer to => [ Side Trim, Tunnel Side ] Side Trim, Tunnel Side.

- Remove the backrest. Refer to => [ Front Backrest ] Front Backrest.

- Remove cover and padding from seat pan. Refer to => [ Seat Pan Cover and Cushion, Sport Seat ] Front Seat Covers and Cushion, Power Memory Seats.

- Remove control module. Refer to => [ Memory Seat Control Module ] Memory Seat Control Module.

- Remove belt buckle. Refer to => [ Seat Belt Anchor ] Service and Repair.

- Remove spring mat with wiring harness from seat pan. Refer to => [ Spring Mat with Seat Pan Wiring Harness ] Spring Mat With Seat Pan Wiring Harness.

- Separate upper seat pan frame from lower seat pan frame.

• Installing

To install, perform the steps used in removal in reverse order.

3 Motor for Seat Inclination Adjustment

4 Longitudinal Seat Adjustment Motor

5 Backrest Adjustment Motor