1/3 Backrest, Removing and Installing

1/3 Backrest, Removing And Installing







- Removal:
- Fold both backrests forward.
- Unclip panels - 3 - from behind in - direction of arrow -, lever out through a hole from behind if necessary.
- Unscrew bolt - 1 - and remove clamp - 2 -.
Tightening torques for bolt - 1 - : 10 Nm.







- Lift backrest - 1 - from center support - 2 - in direction of arrow - A - and detach from fitting - 3 - in - direction of arrow B -.







NOTE: If the sleeve - 4 - of fitting is pulled out as well, attach it again.

- Installing:
Installation is reverse of removal.







1 - Screw
2 - Clamp
3 - Trim







1 - Backrest
2 - Center bracket
3 - Fitting
4 - Grommet