Right 2/3 Backrest

Right 2/3 Backrest





1 Backrest

• Removal:

- Fold both backrests forward.

- Unclip panels - 3 - from behind in direction of - arrow -, lever out through a hole from behind if necessary.

- Unscrew bolt - 1 - and remove clamp - 2 -.

• Tightening specifications for bolt - 1 -: 10 Nm

2 Clamp

3 Trim





- Lift backrest - 1 - from center support - 2 - in direction of arrow - A - and detach from fitting - 3 -.

• If the sleeve - 4 - of fitting is pulled out as well, attach it again.

• Installing:

To install, perform the steps used in removal in reverse order.





1 Backrest

2 Center Bracket

3 Fitting

4 Grommet