Diagram 105/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Safety Belt Switch, Front Passenger's Safety Belt Switch, Rear Safety Belt Tensioner, Front Passenger's Seat Occupied Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch

E25 - Front Passenger's Safety Belt Switch

G128 - Front Passenger's Seat Occupied Sensor Passive Occupant Detection System

J234 - Airbag Control Module

N196 - Rear Safety Belt (driver's side) Tensioner Igniter Locations

N197 - Rear Safety Belt (front passenger's side) Tensioner Igniter Locations

N198 - Center Rear Safety Belt Tensioner Igniter Locations

T2aa - Double Connector, yellow, interior, left rear

T2ab - Double Connector, yellow, interior, right rear

T2ac - Double Connector, yellow, interior, center rear

T8b - 8-Pin Connector, black, seat wiring connector station, driver seat

T8c - 8-Pin Connector, black, seat wiring connector station, passenger seat

(109) - Ground Connection (in airbag wiring harness)

(412) - Ground Connection 3 (in power seat wiring harness)

* - with Seat Occupied Recognition Pressure Sensor (Bladder mat) only

** - with rear safety belt tensioner only

*** - without Seat Occupied Recognition Pressure Sensor (Bladder mat) only

Previous Diagram 105/7 (Tracks 71-84)

Next Diagram 105/9 (Tracks 99-112)