Side-Mounted Turn Signals

Side-Mounted Turn Signals

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

Side-Mounted Turn Signals, Removing and Installing

Removing

- Switch ignition off and remove ignition key.

- Push side turn signal lamp against retaining tab - arrow - in driving direction and carefully remove from opening.





- Remove housing for side turn signals from bulb socket.

Installing

Installation is the reverse of removal.