Tail Lamp and Bulb Holder, MY 2007

Tail Lamp and Bulb Holder, MY 2007

Removing





- Turn the cap in the luggage compartment trim panel - arrow - and remove.

- Remove bolt - 2 -.





• The outer tail lamp can not be removed if the screw is not removed.

• - 3 - may not be loosened to remove the tail lamp.

- Slide rear light - 1 - toward outside - arrow - and disengage from retaining pins on body.

- Disconnect electrical harness connector at taillight.

- Turn bulb socket - 1 - counter-clockwise - arrow -and remove from housing - 2 -.





- Twist bulb out of bulb socket.

Installing

Install in reverse order of removal, observing the following:

• Make sure seal between body and tail lamp housing seals properly.

- Position taillight on retaining bolts from outside and press on in direction of vehicle center until it locks.

Tightening Specifications