Lifting With Suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC and 2ME

Lifting with Suspension 1BA, 1BR, 1BE, 1BV, 1BD, 2MC and 2ME

During the next step make sure that the wheels do not lose contact with the turntables when the vehicle is raised!

If this should happen, turntables should not be moved. This would give false results!

- Position axle lift under front jacking points and raise vehicle.

• The vehicle is raised by 60 mm.

- Move cylinder in threaded spindles and secure with bolts.





Make sure that bolts - arrows - are correctly positioned!

- Lower vehicle on Spacer Unit (V.A.G 1925).