Headlamp Washer System

Headlamp Washer System

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

=> [ Headlamp Washer Spray Nozzle Inserts ]

=> [ Headlamp Washer Spray Nozzles ]

=> [ Washer Fluid Reservoir ]

Headlamp Washer Spray Nozzle Inserts

Removing

- Pull up on spray jet covers at bumper and carefully disengage mounts - arrow -.





- Unclip retaining clip and pull spray jet insert upward - arrows -.





Installing

Installation is the reverse of removal.

Headlamp Washer Spray Nozzles

Removing

- Pull spray jet covers upward at bumper and carefully disengage mounts - arrow -.





- Remove the respective headlamp => [ Halogen Headlamps ] Halogen Headlamps or => [ HID Headlamps ] HID Headlamps.

- Remove washer fluid hose - 3 - (press release button).





- Unscrew bolts - 1 - and - 2 - and remove spray jet.

• Illustration is shown with bumper removed.

Installing

Installation is reverse of removal, paying attention to the following:

- Install headlamp => [ Halogen Headlamps ] Halogen Headlamps or => [ HID Headlamps ] HID Headlamps.

Tightening Specifications





Washer Fluid Reservoir

• The washer fluid reservoir supplies both the windshield and the headlamp washer systems, and is located at the front left of the engine compartment. Removing and installing => [ Washer Fluid Reservoir ] Windshield Washer System.