Airbag Adapter, Connecting

Airbag Adapter, Connecting

Special tools, testers and auxiliary items required

• Airbag adapter (VAS 6036)

• Vehicle Diagnosis, Testing and Information System (VAS 5051B)

• Technician must be grounded before disconnecting ignition and ground wiring, touching door striker or body.

CAUTION!
The Airbag Adapter (VAS 6036) must stay connected to seat until seat is installed again.





1 Side Airbag Connector, Seat Side (Yellow)

2 Side Airbag Connector, Adapter Side (Yellow)

- Disconnect ignition and ground wiring.

- Attach adapter-side of side airbag connector - 2 - to seat-side of side airbag connector - 1 -.

3 Power Supply Connector, Adapter Side (Red)

4 Power Supply Connector, Seat Side (Red)

Disconnect the side airbag connector





- Press catch - 3 - on connector for side airbag - 2 - from counterpart - 1 - and remove it.

- Follow measures after connecting battery.

• If the airbag malfunction indicator lamp (K75) indicates a malfunction after assembly, check the DTC memory with the vehicle diagnosis, testing and information system (VAS 5051B), clear it, and check it again.