Seat Cushion Extension, Sport Seat

Power Front Memory Seats

• From 07.2006, the usual wiring harness routing to connector station under front seat => [ Connectors, Disconnecting ] Power Front Memory Seats Overview has been replaced with modular wiring routing => [ Modular Wiring Routing, from 07.2006, Assembly Overview ] Standard Front Seats Overview.

• The modular wiring routing has not been implemented for all countries.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular => [ Modular Wiring Routing Versions ] Standard Front Seats Overview.



Seat Cushion Extension, Sport Seat

Special tools, testers and auxiliary items required

• Engine and transmission holder (VAS 6095)

• Fixture for seat repair (VAS 6136)





1 Seat cushion extension

• Removing

- Remove seat => [ Power Front Memory Seat ].

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Remove drawer or storage compartment:

• Drawer, removing => [ Drawer, through 06.2006 ]

• Storage compartment, removing => [ Storage Compartment ].

- Detach cover and cushion from seat pan => [ Seat Pan Cover and Upholstery, Sport Seat ] Front Seat Covers and Upholstery, Power Memory Seats.

- Detach seat cushion extension from cover and cushion.

• Installing

To install, perform the steps used in removal in reverse order.

2 Screws (Qty. 4)

3 Trim

• Removing

- Pry off clips - 4 - (Qty. 4) from face plate - 3 -.

• Installing

To install, perform the steps used in removal in reverse order.

4 Clips (Qty. 4)

5 Handle

• Removing

- Remove bolts - 2 - (4x).

- Remove handle - 5 -.

• Installing

To install, perform the steps used in removal in reverse order.