Air Cleaner Housing: Service and Repair

Air Filter Assembly Overview





1 Water drain

• Check for contamination and clean if necessary (note valve)

• Water drain hose must be fully functional

2 Air flap positioner (V63)

3 Air filter housing, lower

• Clean air filter housing-lower part of salt residue, dirt and leaves

• Check water drain for contamination and clean if necessary (note valve)

4 Rubber grommet

5 Air duct

• To lock carrier

• Clean air duct of dirt and leaves

6 1.5 Nm

7 Air duct

• Clean air duct of dirt and leaves

8 Connection

9 Air duct hose to throttle valve control module (J338)

• With resonator

10 Wiring router

11 O-ring

• Replace

12 1.5 Nm

• For securing air filter insert - 15 -

13 Air filter housing, upper

• Clean air filter housing-upper part of salt residue, dirt and leaves

14 Air duct

• Clipped into upper part of air filter housing

• Clean air duct of dirt and leaves

15 Air filter element

• Always use a genuine air filter element

• Removing and installing => [ Air Filter Element ] Service and Repair.

• Clean snow screen also (if present)

16 O-ring

• Replace

17 Spreader clip

18 Grommet