Indirect Ventilation Trim

Indirect Ventilation Trim

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

• Feeler gauge

Removing





- Remove Sunlight Photo Sensor (G107) - Item 1 - off with 0.35 mm feeler gauge - 2 - and disconnect electrical connector.

- Remove driver side and passenger side A-pillar trim. Refer to => [ Upper A-Pillar Trim ] Upper A-Pillar Trim.





- Remove spreader pins - arrows - at left and right.

- Remove indirect ventilation trim from instrument panel with (3409).

- Pull trim back.

Installation

Installation is reverse of removal, but note the following:

- Install driver side and passenger side A-pillar trim. Refer to => [ Upper A-Pillar Trim ] Upper A-Pillar Trim.