Diagram 102/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery, Energy Management Control Module, Battery Monitoring Control Module, Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

J367 - Battery Monitoring Control Module 3.0L CCAA Overview

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

J644 - Energy Management Control Module Overview of Control Modules

S131 - Safety Fuse 1 Overview of Fuses

S132 - Safety Fuse 2 Overview of Fuses

S133 - Safety Fuse 3 Overview of Fuses

SF5 - Fuse 5 (on fuse panel F) Overview of Fuses

SF6 - Fuse 6 (on fuse panel F) Overview of Fuses

T2bc - Double Connector, yellow, on battery monitoring control module

T17a - 17-Pin Connector, red, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T20p - 20-Pin Connector, black, on data bus on board diagnostic interface

T46b - 46-Pin Connector, right CAN separating connector

(624) - Ground Connection (near starter battery)

(B272) - Plus Connection (30) (in main wiring harness)

(B300) - Plus Connection 4 (30) (in main wiring harness)

(B301) - Plus Connection 5 (30) (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

- CAN-Bus (data wire)

* - Models without auxiliary battery

** - Models with auxiliary battery

# - Main fuse carrier, in right rear luggage compartment on battery

## - Through May 2008

### - from June 2008

Next Diagram 102/3 (Tracks 15-28)