Diagram 68/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Coolant Circulation Pump Relay, Camshaft Adjustment Valves, Map Controlled Engine Cooling Thermostat, Intake Flap Motor, Variable Intake Manifold Runner Motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F265 - Map Controlled Engine Cooling Thermostat 4.2L BVJ / BNK Overviews

J151 - Coolant Circulation Pump Relay Overview of Relay Carrier

J623 - Engine Control Module (ECM) Overview of Control Modules

N205 - Camshaft Adjustment Valve 1 4.2L BVJ / BNK Overviews

N208 - Camshaft Adjustment Valve 2 4.2L BVJ / BNK Overviews

N318 - Camshaft Adjustment Valve 1 (exhaust) 4.2L BVJ / BNK Overviews

N319 - Camshaft Adjustment Valve 2 (exhaust) 4.2L BVJ / BNK Overviews

SA3 - Fuse 3 (on fuse panel A) Overview of Fuses

T60a - 60-Pin Connector, black (Connector A), on engine control module (ECM)

T94a - 94-Pin Connector, black (Connector B), on engine control module (ECM)

V51 - After-Run Coolant Pump Locations

V157 - Intake Flap Motor 4.2L BVJ / BNK Overviews

V183 - Variable Intake Manifold Runner Motor 4.2L BVJ / BNK Overviews

(D110) - Connection 8 (in engine compartment wiring harness)

* - Relay Carrier Electronics Box (plenum chamber, left)

** - Only hot countries

Previous Diagram 68/16 (Tracks 197-210)

Next Diagram 68/18 (Tracks 225-238)