Diagram 27/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Coolant Fan Control, 4.2L engines BAT, BNK





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

B - Starter

C - Generator (GEN)

C24 - Suppressor

J271 - Motronic Engine Control Module (ECM) Power Supply Relay Overview of Relay Carrier

J293 - Coolant Fan Control (FC) Control Module Locations

J623 - Engine Control Module (ECM) Overview of Control Modules

J655 - Battery Switch-Off Relay

J671 - Coolant Fan Control (FC) Control Module 2 Locations

S42 - Coolant Fan Single Fuse Overview of Fuses

S104 - Second Speed Coolant Fan Fuse Overview of Fuses

S130 - Secondary Air Injection (AIR) Pump Fuse Overview of Fuses

SA19 - Fuse 9 (on fuse panel engine compartment) Overview of Fuses

T4c - 4-Pin Connector, black, electronics box in right plenum chamber, coolant Fan

T40a - 40-Pin Connector, black (Connector B), on engine control module (ECM)

T81a - 81-Pin Connector, black (Connector A), on engine control module (ECM)

V7 - Coolant Fan Locations

V177 - Coolant Fan 2 Locations

(614) - Ground Connection 2 (in engine compartment, right) Overview of Ground Connections in Front Part of Vehicle

(646) - Ground Connection 2 (on firewall) Overview of Ground Connections in Front Part of Vehicle

(D101) - Connection 1 (in engine compartment wiring harness)

(K21) - Connection 1 (in coolant fan wiring harness)

* - Main fuse carrier electronics box in right plenum chamber

Next Diagram 27/3 (Tracks 15-28)