Side Trim, Tunnel Side

Side Trim, Tunnel Side

Special tools, testers and auxiliary items required

• Engine and transmission holder (VAS 6095)

• Fixture for seat repair (VAS 6136)

Removing

- Remove seat => [ Seat ].

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Remove the right backrest cover => [ Backrest Cover, Removing and Installing ].

- Remove the belt latch => [ Belt Latch Anchorage Point ] Service and Repair.

• Do not disconnect the electrical connector.

- Press the locking pin inward and remove the expanding clip - 1 -.





- Release the clip - 3 - - arrow A - and remove the tunnel side trim - 2 - upward and toward the front - B arrows -.

Installing

Installation is reverse of removal, but note the following:

• Tightening specifications => [ Belt Latch Anchorage Point ] Service and Repair.

- Make sure the side trim on the tunnel side engages correctly in the backrest.