Wiper Arm

Wiper Arm

Special tools, testers and auxiliary items required

• Puller (T10369)

Removing

- Switch on ignition.

- Activate rear wipe and let wiper arm run to end position.

- Switch off ignition and remove ignition key.

- Carefully expand cap - arrows - and remove.





- Carefully pull off nozzle - 2 -.





- Loosen the nut - 1 - one turn.

- Install an M6 nut - 4 -.





- Position the puller (T10369/1) on the wiper arm - 1 - as illustrated.

- Position the thrust piece - 2 - on the wiper axle.

- Rotate the bolt - 3 - clockwise until the wiper arm is removed from the axle.

- Remove nuts completely and remove wiper arm.

Installing

Install in reverse order of removal, observing the following:

- Adjust wiper arm. Refer to => [ Wiper Arm, Adjusting ] Wiper Arm, Adjusting.