Floor MAT

Floor Mat





1 Floor Covering

• Removing

- Remove front seats. Refer to => [ Power Front Memory Seat ] Power Front Memory Seats.

- Remove the rear bench seat. Refer to => [ Bench Seat ] Bench Seat.

- Remove rear center console. Refer to => [ Rear Center Console ] Rear Center Console.

- Remove front center console. Refer to => [ Front Center Console ] Front Center Console.

- Remove bar piece at left and right. Refer to => [ Bar Piece ] Bar Piece.

- Remove upper B-pillar trim on left and right. Refer to => [ Upper B-Pillar Trim ] Upper B-Pillar Trim.

- Remove lower B-pillar trim on left and right. Refer to => [ Lower B-Pillar Trim ] Lower B-Pillar Trim.

- Remove lower A-pillar trim on left and right. Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim.

- Remove wheel housing trim at left in right in floor covering area - 1 -. Refer to => [ Rear Wheel Housing Trim ] Rear Wheel Housing Trim.

- Remove base support. Refer to => [ Cover and Footrest Bracket ] Cover and Footrest Bracket.

- If necessary, remove any covers or panels present for connector points, footwell vents, etc.

- Remove spring nuts - 8 - (quantity: 6).

- Pull floor covering back from pins (quantity: 6) on center console frame.

- Remove center console frame. Refer to => [ Center Console Frame ] Center Console Frame.

- Pull floor covering - 1 - toward rear.

- Fold floor covering - 1 - lengthwise and remove through a door.

• Installing

• Floor covering rips easily from cut-outs. Carefully install floor covering in vehicle.

- When installing floor covering - 1 -, remove transport brace - arrow -.

- Push floor covering - 1 - all the way forward.

- Check if all floor covering cut-outs - 1 - are positioned correctly.

- Install center console frame. Refer to => [ Center Console Frame ] Center Console Frame.

- When installing center console frame, ensure this is seated in rear area of floor covering.

- Secure floor covering - 1 - with pins (quantity: 6) on center console frame.

- Install new spring nuts - 8 -.

- If necessary, install any covers or panels present for connector points, footwell vents, etc.

- Install base support. Refer to => [ Cover and Footrest Bracket ] Cover and Footrest Bracket.

- Install wheel housing trim at left in right in floor covering area - 1 -. Refer to => [ Rear Wheel Housing Trim ] Rear Wheel Housing Trim.

- Install lower A-pillar trim on left and right. Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim.

- Install lower B-pillar trim on left and right. Refer to => [ Lower B-Pillar Trim ] Lower B-Pillar Trim.

- Install upper B-pillar trim on left and right. Refer to => [ Upper B-Pillar Trim ] Upper B-Pillar Trim.

- Install bar piece at left and right. Refer to => [ Bar Piece ] Bar Piece.

- Install rear center console. Refer to => [ Rear Center Console ] Rear Center Console.

- Install front center console. Refer to => [ Front Center Console ] Front Center Console.

- Install the rear bench seat. Refer to => [ Bench Seat ] Bench Seat.

- Install front seats. Refer to => [ Power Front Memory Seat ] Power Front Memory Seats.

- Install door seal lip over lower A-pillar trim, upper and lower B-pillar trim, bar piece and wheel housing trim.

2 Rear Wheel Housing Trim

3 Rear Wheel Housing Trim Support Piece

4 Floor Covering Reinforcement

5 Lower A-pillar Trim Panel

6 Lower A-pillar Trim Support Piece

7 Driver Side Compartment

8 Spring Nut

Quantity: 6

• Replace after each disassembly

Secure Floor Covering





- Slide floor covering - 1 - onto pins - 2 - (quantity: 6).

- Install new spring nuts - 3 - (quantity: 6).

Center console frame installation position





Ensure rear area - arrow - of center console frame - 1 - is seated correctly on floor covering - 2 -.