Rear Door Lock

Rear Door Lock





1 Multi-point bolts M8

• 20 Nm

2 Rear Door

3 Seal

4 Inside door release mechanism release

• Engage in release lever - 7 - on door lock - 5 -=> [ Engaging release in door lock ]

5 Door lock

• If the vehicle has closing assist, then disconnect the cable on each motor.

• Door trim removed.

• Window frame and window regulator removed.

• Disconnect the door lock connector.

• Release retainer on release lever and unclip operating rod => [ Engaging operating rod in door lock ]

• Remove the multi-point bolts - 1 - and remove door lock.

6 Seal

• Clip into door.

7 Release lever

Engaging release in door lock





- To install, first insert release - 2 - vertically into release lever - 3 - as shown in the magnified area of illustration, then swivel 90° and clip into door lock - 1 - to secure.