Zero Adjustment For Sunroof Operation, Checking

Zero Adjustment for Sunroof Operation, Checking

• Zero position can only be checked when sunroof panel is installed.

- Remove trim. Refer to => [ Slotted Guide Rail Cowl Panel Trim ] Slotted Guide Rail Cowl Panel Trim.

- Close sunroof.

- Slide sunroof headliner completely toward rear.

Only on Vehicles with Solar Panel

- Move solar panel back slightly.





- Pull sunroof headliner downward slightly in direction of arrow and slide in headliner toward rear.

- For a correct zero position, guide pin - 1 - in center must align with marking on guide plate - 2 -.