Airbag Adapter, Connecting

Airbag Adapter, Connecting

Special tools, testers and auxiliary items required

• Airbag adapter (VAS 6036)

• Vehicle Diagnosis, Testing and Information System (VAS 5051B)

• Before disconnecting ignition and ground wiring, technician must electrostatically discharge him/herself (touch door striker plate or pin briefly).

CAUTION!
The Airbag Adapter (VAS 6036) must stay connected to seat until seat is installed again.





1 Power Supply Connector, Seat Side (Red)

2 Power Supply Connector, Adapter Side (Red)

3 Side Airbag Connector, Adapter Side (Yellow)

- Disconnect ignition and ground wiring.

- Connect airbag connector - 4 - to airbag adapter connector - 3 -.

4 Side Airbag Connector, Seat Side (Yellow)

Disconnect the side airbag connector

Special tools, testers and auxiliary items required

• Vehicle Diagnosis, Testing and Information System (VAS 5051B)

- Press catch - 3 - of airbag connector - 2 - out of airbag adapter connector - 1 - and disconnect airbag connector - 2 -.





- Follow measures after connecting battery.

• If the airbag malfunction indicator lamp (K75) indicates a malfunction after assembly, check the DTC memory with the (VAS 5051B), clear it, and check it again.