Height Adjustment Motor Assembly Overview

Power Front Memory Seats

• From 07.2006, the usual wiring harness routing to connector station under front seat => [ Connectors, Disconnecting ] has been replaced with modular wiring routing => [ Modular Wiring Routing, from 07.2006, Assembly Overview ] Standard Front Seats Overview.

• The modular wiring routing has not been implemented for all countries.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular => [ Modular Wiring Routing Versions ] Standard Front Seats Overview.

Height Adjustment Motor Assembly Overview





1 Height adjustment motor

• Driver seat height adjustment motor (V245)

• Passenger seat height adjustment motor (V246)

• Removing and Installing => [ Driver and Front Passenger Height Adjustment Motors ] Power Front Memory Seats

2 Bolt

• 18 Nm

• replace

3 Nut

• Clean the threaded bolt holes for self-locking nuts, for example using a thread tap.

4 Bolt

• 18 Nm

5 Seat pan lower frame

6 Seat pan

7 Bolt

• Tightening specification => [ (Item 5) Bolt ]

8 Bolt

• Tightening specification => [ (Item 1) Screw, self-locking ]

• Clean the threaded bolt holes for self-locking nuts, for example using a thread tap.

9 Bolt

• Tightening specification => [ (Item 1) Screw, self-locking ]

• Clean the threaded bolt holes for self-locking nuts, for example using a thread tap.

10 Bolt

• Tightening specification => [ (Item 1) Screw, self-locking ]

• Clean the threaded bolt holes for self-locking nuts, for example using a thread tap.