Diagram 1/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery, Energy Management Control Module, Battery Switch-Off Relay, Suppressor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

B - Starter

C - Generator (GEN)

C24 - Suppressor

J644 - Energy Management Control Module Overview of Control Modules

J655 - Battery Switch-Off Relay

N253 - Battery Interrupt Igniter Overview of Relay Carrier

S42 - Coolant Fan Single Fuse Overview of Fuses

S104 - Second Speed Coolant Fan Fuse Overview of Fuses

S130 - Secondary Air Injection (AIR) Pump Fuse Overview of Fuses

S131 - Safety Fuse 1 Overview of Fuses

S132 - Safety Fuse 2 Overview of Fuses

S133 - Safety Fuse 3 Overview of Fuses

S134 - Safety Fuse 4 Overview of Fuses

T5 - 5-Pin Connector, yellow, on relay and fuse carrier luggage compartment, right Overview of Connector Stations and Connectors

T17a - 17-Pin Connector, red, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T46b - 46-Pin Connector, right CAN separating connector

(646) - Ground Connection 2 (on firewall) Overview of Ground Connections in Front Part of Vehicle

(B272) - Plus Connection (30) (in main wiring harness)

(B301) - Plus Connection 5 (30) (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

- CAN-Bus (data wire)

* - Main fuse carrier electronics box in right plenum chamber

** - Relay and fuse carrier in right luggage compartment

# - Through June 2004

## - From July 2004

### - Models with secondary air injection (AIR) pump

Previous Diagram 1/4 (Tracks 29-42)

Next Diagram 1/6 (Tracks 57-70)