Diagram 60/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery, Energy Management Control Module, Suppressor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

B - Starter

C - Generator (GEN)

C24 - Suppressor

J234 - Airbag Control Module Overview of Control Modules

J644 - Energy Management Control Module Overview of Control Modules

N253 - Battery Interrupt Igniter Overview of Relay Carrier

S42 - Coolant Fan Single Fuse Overview of Fuses

S104 - Second Speed Coolant Fan Fuse Overview of Fuses

S130 - Secondary Air Injection (AIR) Pump Fuse Overview of Fuses

S131 - Safety Fuse 1 Overview of Fuses

S132 - Safety Fuse 2 Overview of Fuses

S133 - Safety Fuse 3 Overview of Fuses

T2au - Double Connector, purple, on battery interrupt igniter

T17a - 17-Pin Connector, red, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T46b - 46-Pin Connector, right CAN separating connector

T75 - 75-Pin Connector, grey, on airbag control module

(646) - Ground Connection 2 (on firewall) Overview of Ground Connections in Front Part of Vehicle

(B300) - Plus Connection 4 (30) (in main wiring harness)

(B301) - Plus Connection 5 (30) (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

- CAN-Bus (data wire)

* - Main fuse carrier electronics box in right plenum chamber

** - Main fuse panel, in right rear luggage compartment on battery

# - Models with secondary air injection (AIR) pump

Next Diagram 60/3 (Tracks 15-28)