Oil Pump: Service and Repair

Oil Pump

Removing

- Remove lower section of oil pan. Refer to => [ Oil Pan Lower Section ] Oil Pan Lower Section.

- Remove the bolts - arrows -.





- Pull the oil pump forward from the driveshaft; if necessary, push the driveshaft slightly to the rear.

Installing

Installation is in the reverse order of removal, note the following:

• Replace O-rings.

- Install oil pump onto the driveshaft and fasten.

- Install lower section of oil pan. Refer to => [ Oil Pan Lower Section ] Oil Pan Lower Section.

- Fill engine oil and Check oil level.

Tightening Specifications