High and Low Tone Horns

High and Low Tone Horns

Special tools, testers and auxiliary items required

• Pry Lever - Rmv Outside Mirror (80 - 200)

Removing

- Switch off ignition and remove ignition key.

- Remove front bumper cover.

- Disconnect electrical connectors - 1 - and - 3 -.





- Pry out wire clip - 2 - using (80 - 200).

• For easier removal, use silicon-free lubricating spray.

- Remove the bolts - arrows - and remove bracket with signal horns.

- Remove nuts - 1 - and - 2 -.





- Remove the horn from the bracket.

Installing

Install in reverse order of removal, observing the following:

- Install front bumper cover.

Tightening Specifications