Door Locks: Service and Repair

Front Door

Door Lock





1 - Front Door

2 - Front Door Lock

• Assembly carrier removed.

• Drive door window upward completely.

• Lock cover removed => [ Lock Cover ]. Lock Cover

• Disconnect electrical harness connectors to door lock.

• Disengage release - 5 - from release lever - 6 -.

• Remove multi-point bolts - 2 -.

• Remove door lock downward out of door.

3 - Grommet

• Press into assembly carrier.

4 - Release

• To interior door mechanism.

• Secured by clipping into door lock - arrow -.

• Engage in interior door mechanism.

5 - Release Lever

• Insert release into operating lever in direction of arrow.

• Swing release 90° in direction of arrow and clip it in door lock.

6 - Assembly Carrier

• Guide cables for interior door mechanism, closing assist through assembly carrier as shown and press in grommets.

7 - Release

• Only for vehicles with closing assist

• Pull through assembly carrier and engage in closing assist motor.

• Engage release in motor for closing assist => [ Installing Motor for Closing Assist ]. Closing Aid Motor

8 - Seal

• Slide gasket sideways into door lock.

9 - Bolt

• 20 Nm

Engaging Release in Interior Door Mechanism





- When installing door trim, cable - 2 - must be engaged into interior door mechanism - 1 - from top downward as shown.

- Clip cable - arrow - into interior door mechanism.