Procedures

End Pipes, Aligning

Procedure

• Tightening specifications. Refer to => [ Muffler Assembly Overview ] Muffler Assembly Overview.

- Check distance of end pipes at left and right to bumper:

• Dimension - x - left = dimension - x - right





If necessary, correct dimension - x - as follows:





- Loosen threaded connections - arrow - of brace between exhaust pipes.

- Adjust the distance between the rear mufflers.

- Tighten bolts.

- Check distances - y - and - z - of end pipes to bumper:





• Dimension - y - = 13 to 17 mm.

• Dimension - z - = 8 to 12 mm.

- If end pipes cannot be aligned, check whether exhaust system is aligned tension-free. Refer to => [ Exhaust System, Installing ] Removal and Replacement.