Crankshaft Main Bearing Cap

Guide frame





Replace bolts - 1 to 20 -
Tighten bolts as follows:
Tighten bolts - 1 to 10 - 30 Nm
Tighten bolts - 11 to 20 - 20 Nm
Tighten bolts - 1 to 10 - 50 Nm
Tighten bolts - 11 to 20 - 30 Nm
Tighten bolts - 1 to 10 - an additional 90° (1/4 turn)
Tighten bolts - 11 to 20 - an additional 90° (1/4 turn)
Tighten guide frame to cylinder block sealing surface bolts, - highlighted in illustration but not numbered -, in a diagonal sequence to 9 Nm