Glove Compartment Light Switch

Instrument Panel Lamps and Switches

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Glove Compartment light switch

Removing





- Switch off ignition and remove ignition key.

- Remove glove compartment.

- Disconnect electrical connector - 2 -.

- Remove hinge pin - 1 -.

- Open removed glove box.

- Release switch - 3 - counterclockwise - arrow - and remove.

Installing

Install in reverse order of removal, observing the following:

- Install glove compartment.