Gear Oil Level In Transfer Case, Checking

Gear oil level in transfer case, checking 09L, 6 Speed A/T

Special tools, testers and auxiliary items required





^ Drip tray V.A.G 1306
^ Safety glasses

Test condition
^ Gear oil temperature at approx. 20°C (room temperature).

Test sequence
- To ensure vehicle is absolutely level, drive onto a 4-column lifting platform or over a service pit.
- Place drip tray V.A.G 1306 underneath transmission.

CAUTION!
Wear eye protection.





- Remove inspection plug - arrow -.
^ The fluid level must be at the bottom edge of inspection hole opening.
- Drain off excess gear oil or top off to proper level.

Note:
^ Sealing plug with sealing ring must be replaced.

- Tighten new sealing plug to 35 Nm.